VNISH FIRMWARE FOR OVERCLOCKING AND DOWNVOLT ANTMINER L7

OFFICIAL VNISH FIRMWARE

VERSION 1.2.6-alpha3 (autotune)

ATTENTION: We would like to inform you that DevFee for the L7 model has been reduced from 2.8% to 1.9%, starting with version 1.2.5. 

Installing the firmware is possible via an SD card and without an SD card directly into the NAND miner using the utility VNISH TOOLKIT

To install the firmware, use an SD card (no more than 16 GB, FAT 32).

Download the SD file for your control board version and ASIC model, unpack and read installation instructions.

Insert the SD card with VNISH firmware and turn on the miner, if you remove the SD card, the BITMAIN firmware will return.

If you need to update the version of the already used VNISH firmware on an SD card or in NAND, then you need to download the WEB version of the VNISH firmware and load it through the UPGRADE function.

NAND INSTALLATION WITHOUT USING SD CARD: Download the firmware from the INSTALLATION IN NAND WITHOUT USING SD CARD section Installation is possible only using the utility Vnish toolkit. Download the utility and read the installation instructions.
For questions regarding cooperation, or if you have any questions about installing or configuring firmware: